Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey everyone I need a little bit of help. I have a 1995 Chevy Camaro with the factory engine 3.4 L V-6 standard trany. I am wanting to beef it up some by putting a V-8 into it but I really don't know where to start or what to look for. If you have any suggestion I would appreciate them alot. Thanks everyone and have a safe and Happy Holidays.
 

·
Registered
Joined
·
54 Posts
Easiest way to go would be to find a wrecked 4th gen camaro/firebird with LT1, PCM, and wire harness. Probably alot easier said than done.
 

·
Glad the Jeep is on the road
Joined
·
809 Posts
I have not done this but have been thinking about for down the road when the present "spare" 95 Camaro convertible becomes surplus. My friend who has done it says the electrical are the hardest part. If you can score a wreck like the last poster said, and you have the space, that would be the easiest, but second best would be to make sure you have all the wiring harness goodies and the computer.
 
1 - 3 of 3 Posts
Top