Hot Rod Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I've got an 85 4 bolt main , steel crank block w/ 11 to 1 pistons . Using the 462624 head my C.R will be 9 to 1 . This is what I want.
Can the 95 LT-1 heads be used ? the 624's are 73 cc , thats what droped the C.R. to 9.
Also , what about the cooling for this head swap ?
Thanks, George Hood
Clinton , N.C.
 

·
Hates: Liver. Loves: Diesel
Joined
·
6,313 Posts
Not practically. It involves welding water passages shut, drilling new ones, resurfacing the heads, and moving head bolts. Put it this way... you could do it for the same amount of work and money as it would take to put LS1 heads on an SBC. You'd spend thousands on the LT1 heads, just to get heads that perform the same as $300 Vortecs.

The LT1 heads are worth money. Accept them, sell them, and then buy SBC heads
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top