Hot Rod Forum banner
1 - 1 of 6 Posts

· Registered
775 Posts

Trees is right. The truck should go back together w/the frame and doors, to make sure door alignment is perfect. Then tack bracing, like he suggested, before removing doors or frame. If you don't do this first, it's almost certain that you will have door alignment problems after repacing the rockers. this problem will be permanent.Speaking from bad experience with farm trucks.

As far as the job being "doable", it,s not too bad, if you can weld. Get a buddy with some experience to give you a hand.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.