[turbotim23]

Hi I'm trying to chop my station wagon's top. I want to lower the front more than rear,Shorten and move the roof forward so I can tilt the rear roof posts radically forward say on about a 45 degree angle. The Qtr. side widows will be filled in with metal like exprss wagons.
The problem is the curved door and ft windsheild glass.I've been told it won't be the proper angle to fit this type of chopped top. I would try a straight glass and window frame from some other car but don't have a clue where to look for this. Not sure how weird straight glass and posts would look either. Any advice on how to overcome this? Thanks

[ November 29, 2002: Message edited by: turbotim23 ]</p>

 

[stonedchihuahua]

First off I am NO expert on chopping... but what I would do is find a car of the same make with very similar pillars and doors (measuring required) with the angle you want and then go and see what is the best way of attaching... THen again I know nothing about chopping.

 

[Will's41]

Hey turbotim23, what kind of wagon is this?