Hot Rod Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I have this urge to try this Tri-Power setup on my SBC but I have an HEI distributer with an electronic tach output that won't fit behind the last carb. I don't want to give up the HEI or the electronic tach. Is there a GOOD HEI dist that is smaller that would fit and still have the tach output? I'm not too keen on MSD boxes screwed to the firewall either.
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
Looks like I'll be forced into the red box screwed to the firewall with this tripower setup. Dist MSD p/n 8750 $253 and MSD 6a Box $170.

There's not much room there so I guess this is the only way.

Thanks for the advice.

Bill
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #6 ·
cool rockin daddy said:
I thought both MSD and Mallory made small diameter top HEI distributors for just this problem
I wish they could get it all stuffed in one unit. I haven't talked to Mallory but did see some small HEI units from them. No mention of a tach output in the writeup though. I should give them a call too.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top