Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hiya. Traded my TH350 for a Super T10 and I let go of the trans mount with bolts attached.. anyone know what thread size the 2 mount holes are to save me guess work? I know it's not 7/16th-14 the poly trans mount came with those and they are too big.. looks like a 3/8th-16? Anyone confirm this? Thanks :thumbup:
 

·
Registered
Joined
·
818 Posts
It depends on what year the transmission is. Some of them used metric bolts. You can use the transmission mount from a Turbo 400. There are 2 different transmission mounts they sell at the parts stores, some don't have the holes drilled in the right spot and some are drilled to fit 2 different transmissions.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top