Hot Rod Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
8,552 Posts
You need to get your static CR up to 9.5 to one

Smaller chambered heads, flat tops. 82-85 CC will get you there.Zero deck the block. Use the quench built in to fend off detonation
You need to know the compression height of the pistons

Stock rods are not ideal
I would put in some forged ones
You could get a butler stroker kit and run the heads you have.The increased stroke would make the heads about right for 9.5 to one
Plus all those extra cubic inches more power,more fun
 
1 - 1 of 1 Posts
Top