Hot Rod Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,265 Posts
its simple, no sweat.

Go to a salvage yard and find the caddy you with to take the tails and remove at least 1" of steel around the tail in a rectagular patch panel. This will give you the tail light, correct buckets, mounting and anything else you need. Take them home, remove the same shape from the rear of the elky, weld in the patch bucket and any other patch panels you may need to add do some metal finishing and smoothing prime and paint. Run the wires, mount the light and llense and you have yourself a elkaddy! If you need further help feel free to ask.

HK
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top