Hot Rod Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
11 Posts
You must bypass the resistor (usually mounted on the firewall and white in color)that is connected between the coil (+) and the ignition sw. disconnect the resistor,find the wire that has 12volts when the key is on be sure it still has 12v when in start position. connect it to the battery (+) connection on the new dist. done.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top