Hot Rod Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
would like to bolt up a '95 B/W T-5 transmisssion out of a Camaro
to an '02 Chev 4.3 V6, but have been unable to find a bell hsg
that will accomodate this little task. Is there any help out there?
 

·
Hotrodders.com moderator
Joined
·
9,581 Posts
Bell housing

I have been going through this for my project and found that the 4.3 and the SBC have the same bolt pattern..the Camaro trans may be the slant version so you will need that bell housing..Lakewood does make a sfi scattershield for this application if you need to go with that..


Good luck let me know what you found out..
 
1 - 2 of 2 Posts
Top