Hot Rod Forum banner

Chevy 350 backfiring through carb no start

315 Views 4 Replies 3 Participants Last post by  Eduramac
I recently removed an painted my intake manifold, after reinstalling everything it will no longer start. I’m pretty positive I have it back in time, although I’m relatively new to this as this is my first project car and I’m only 19 years old. I do suspect it to be a distributor issue, it’s an MSD PN8361. So if anyones has any advice or tips it’d be greatly appreciated.
1 - 2 of 2 Posts

· Registered
1978 Chevrolet Corvette L-48
Joined
·
2 Posts
Discussion Starter · #2 ·
I recently removed an painted my intake manifold, after reinstalling everything it will no longer start. I’m pretty positive I have it back in time, although I’m relatively new to this as this is my first project car and I’m only 19 years old. I do suspect it to be a distributor issue, it’s an MSD PN8361. So if anyones has any advice or tips it’d be greatly appreciated.
Forgot to mention it gets close to starting an will spit gas through the carb and sputter.
 
1 - 2 of 2 Posts
Top