Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter · #1 ·
I am thinking of buying Connect and Cruise LS3 with a 4L70E transmission to put in my 56 Chevy 3100 truck. What else beside an AC compressor do you need to make it work. Do you have to buy a serpentine belt system or what else.
Thanks in advance.
 

·
Registered
Joined
·
1,827 Posts
Good news is all the LS engines have serpentine belt system. More good news is that the A/C system is a separate serpentine belt. Bad news is you can't use the OEM compressor. Good news is there is a bracket for a Sanden compressor. So buy an aftermarket stand alone system which should include mounts and belt. The belt is a 4 rib and runs on a separate area of the crank pulley.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top