Hot Rod Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
I am getting a coolant leak on my 350, it is right above the starter. I am gonna pull the starter and take a look, thought I would ask though, as I just changed the pan gasket when I built the motor.
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #7 ·
hahah hillarious

hahhah no I also tightened the bolt for the coolant on the side of the block below the exhaust manifold aswell. Coolant was leaking from it when I was pouring it in the rad. But yeah....funny about the tires cause they do need air.....somehow I can't see it helping the wiring though 8)
 

·
Registered
Joined
·
973 Posts
But yeah....funny about the tires cause they do need air.....somehow I can't see it helping the wiring though 8)
It'll Help as much as putting a Bolt in an Oil hole, when looking for a Coolant Leak............
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top