Hot Rod Forum banner

1 - 3 of 3 Posts

·
Bowtie or Die!
Joined
·
636 Posts
Just go to the junk yard, find any later model ford and remove the inertia switch (fuel pump shut off). There on all the fuel injected fords as far as I know. It only uses 2 wires just wire it in series with the fuel pump power or ground ckt. They open the ckt when bumped hard or a crash etc.
 

·
Car? Truck? Who Cares
Joined
·
2,485 Posts
That even looks like a late 80s ford switch.

I put one in the Elky from a 99 Taurus-----wired it thru the relay.

From the fuel pump relay coil ground--to the inertia switch---to a hidden on/off switch (anti theft) to ground.

2 screws and 2 wires-----EZ

Bryan
 
1 - 3 of 3 Posts
Top