Hot Rod Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi guys,

Been lurking a while and decided to register and ask a few burning questions.

Could anyone provide me with the outside dimensions of a 33/34 ford passenger car grill shell.

Am in the planning stages for a little hot rod and need to know those measurements.

Thanks in advance.
 

· Registered
Joined
·
982 Posts
i just measured my 34 grille so here goes:
33 inches top to bottom
from the center grille bar to outer edge(where the hood meets the grille) 11 1/4" (at the widest point near the top of grille).add 1 1/4" on each side where the hood overlaps the grille. 10 3/4' at the point where the bottom of the hood meets the grille.
this is a bit hard as the grille narrows at the bottom. hope this helps.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top