Hot Rod Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Just got a pair of dolphin power window regulators. The "instructions" leave a lot left to be desired. Was wondering if anybody else has installed these and what they have experienced. Is there a "trick"? I'm a bit confused on the whole assembly process. Any help would be appreciated. Thanks.
 

·
Just a firefighter
Joined
·
324 Posts
I put a set in a '46 Chevy Panel truck and yes your right the instructions leave more than allot of information. What I had to do was just fab my own mount for them and work with it till I got it right. Just don't use glass to fit them with use cardboard or thin masonite make sure everything works right before installing the glass. I still had one crack on me.

http://hotrodders.com/gallery/showphoto.php/photo/19099/size/big/cat/500/page/2

http://hotrodders.com/gallery/showphoto.php/photo/19098/size/big/cat/500/page/2

Good luck
 
1 - 2 of 2 Posts
Top