Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4,725 Posts
The eagle stuff is not too bad from what I have read. There have been some issues with the connecting rods not being within proper specs for pin diameter size wise but othern then that they are pretty good for a decent street build. Also if you want go with scat they run about the same price and I have used two rotating assemblies from them and they are excellent and the rods you get from them are 4340 not 5140 and are stronger.
Eric
 

·
Hotrodders.com Moderator
Joined
·
2,783 Posts
parts

I have used both eagle and scat rods and cranks. I personally only use eagles "H" beam rod. Everything else i buy scat.

I have never broken any of the eagle cranks or rods, but the quality issue they can have makes it not worth me buying from them anymore.


Keith
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top