Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,792 Posts
The eagle stuff is not too bad from what I have read. There have been some issues with the connecting rods not being within proper specs for pin diameter size wise but othern then that they are pretty good for a decent street build. Also if you want go with scat they run about the same price and I have used two rotating assemblies from them and they are excellent and the rods you get from them are 4340 not 5140 and are stronger.
Eric
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top