Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,265 Posts
Heres a quick easy way to do it. Get some aluminum flashing make the box as deep as you want it, get some fiberglass cloth, or some fiberglass matt(easier) soak the matt in fiberglass resin and build up the box, sand it smooth, then mold it into the car with fiberglass cloth and resin, sand it smooth, prime and paint.

The good thing about aluminum flashing is you don't need a releasing agent because its so smooth you can just peel it right off/out, or leave it on, it doesn't really matter. After you peel off the flashing you can cut it down to size and mold it in.

Ask Shawn Asseln on this board hes the top 'glass guy, he does it for a living so he should know.

HK
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top