Hot Rod Forum banner
1 - 2 of 2 Posts

·
Junkyard Kustoms
Joined
·
298 Posts
Discussion Starter · #1 ·
This is a panel i crated out of flat steel. I rounded it out with a hammer and dolly, then cut a 4 by 4.5 hole in in welded it in, ground it, fibreglassed it and the i began to bondo and prepare it for paint. 2 coats ep primer, 400 wet sand,primer sealer, 600 wet sand, black gloss base, 600 wet, orange white and grey to follow, wet sand 600, then final india ink and then a pearly metallic gold flake clear 4 coats.
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top