Hot Rod Forum banner

flathead to s10 clutch to pedal problem

1105 Views 1 Reply 2 Participants Last post by  bobjob
I have a 1950 ford f1 truck. Bought the flat-o-matic s10 trans. I'am happy but dont know how to hook up the peddle to the clutch fork. Help !!!
1 - 2 of 2 Posts
sounds like you'r gonna have to get creative,, maybe a cable and some brackets??you can get heavy cables w/ adjustments from tractor dealer,,and then do some "cutting and fitting"...shorten -up cable to fit,, drill out clevis,, and use silver-solder with proper flux..and make -up some brackets...just my guess not knowing and not seeing..
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.