Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I am looking for soe one who can tell me where I can get a solid lift cam with a lift of .500 to .520 that is a roller with 280+ duration @050. This will be used on a paved oval stock car. Race Engineering 2340 L/W bottom end custom exhaust stock EFI or CARB intake Mel's Ignition and Dorton 350 cab with one inch space. stock 2.14 tranny and 340 rear end gears. RPM's 6000 off corner and pulls to about 7500. Need roller cam where do I look.......
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top