Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I may have misstated my needs/question in my previous request (35 Ford) What I need to know is will the early (70's) 2.8/3.0 V-6 Ford manual trans bolt up to the current Ford 3.0's used in front wheel drive's (Taurus) with auto trans. If so what do I have to do to hook up the computer to the trans? Any help appreciated. Been out of it for a while (Roddin)
 

·
Registered
Joined
·
67 Posts
3.0 Taurus, are natouris for transmission problems
from my checking no ability to use your motor, I also have a good motor, thers no home for it except the wrecking yard, these are coming in at about 2-per week. a good 289-302 and a c-4 or c-6
is probably your easist change, also side mounted motors are harder to get the geometery correct. Need a boat anchor that runs great,It's Cheap.
 
1 - 2 of 2 Posts
Top