Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
225 Posts
Discussion Starter · #1 ·
I want to use a fox body Mustang 5.0L brake booster but adapting a linkage to the original pedal pin that comes out of the booster is going to be tricky because it has a downward bend and a large hole. I was wondering if it is removable somehow so i could make a straight, long one.
Application is an under floor location for a 57 chev truck and this booster is nice and compact and is the one used with some aftermarket kits.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top