Hot Rod Forum banner
1 - 1 of 9 Posts

· Magazines have “ISSUES”
1,179 Posts
You can find the gear ratio by counting how many driveshaft turns it takes to rotate both rear tires exactly one rotation... 3 1/2 turns = 3.50 ratio... etc... Or count the number of gear teeth on pinion and ring gears and divide if you have it apart...

With one rear tire jacked up and one still on the ground and the tranny in neutral, you can effortlessly spin the one up tire
and driveshaft by hand with an open rear end... it will be difficult to impossible with a posi rear end...

ROTFLAMO ......... that's pretty true .............. hilarious !

Just having fun...

Greg :)
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.