Hot Rod Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
18,653 Posts
Sounds like your timing is too far advanced....when the "kill" switch is on, there is not spark, so there is no resistance on the pistons due to combustion on the upstroke.

Back the timing off and try it.

Are you running vacuum advance and low initial timing....or no vacuum advance and a lot of initial advance?

I bet the latter...................
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top