Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
Im working on some 1984 ford 351 w heads with supposedly flame hardend ex seats....they are moderately sunken in though...the stock valve size is 1.45 or so..My question is-if i cut the seats for 1.55 valves without putting in the inserts what kind of life can I expect from the seats?
will be using stock springs-
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top