Hot Rod Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Again I Need Some Help With My 312 Ford Engine. I Removed Both Heads Because I Had A Stuck Valve On One Of The Heads, While I Was There I Lapped In All The Valves & Put New Valve Seals In. Now Its Time To Install The Heads & I Looked Up The Head Bolt Torque One Book Tells Me The Torque Is 55ft.lbs. 2nd. Is 65 Ft. Lbs. & Last Torque Is 75ft. Lbs. Hot. Another Book Tells Me 1st. Torque Is 70ft. Lbs., 2nd Is 80ft.lbs. & Last Is 90ft. Lbs. Hot.could Someone Please Help Me Out, Before I Damage Something. Thanks For The Help Headache
 
1 - 2 of 2 Posts
Top