Hot Rod Forum banner

Hello from Hayden, ID

695 Views 1 Reply 2 Participants Last post by  455olds
Hi - first post here, I'm a member at the HAMB and also I've gotten a lot of good info from this site via google searches, so I had to join.

I'm refurbishing/restoring/hot-rodding my 1950 Ford Moredoor. I'm almost at the point of pulling the body off the frame for sandblasting, then we'll see how the body is at that point.

Based on a lot of reading and recommendations here, I ordered the SPI epoxy primer and wax/grease remover from Andy at SPI today. Thanks to all who've contributed on that subject!

Happy to be here!


See less See more
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.