Hot Rod Forum banner
1 - 1 of 15 Posts

· Registered
926 Posts
jeepers creepers,

I like the tool but I like the driver and pilot guide to be made of steel. I have made these for years. I find the aluminum distorts and can get stuck on the bearing. With steel I don't worry about this. Alsi I make the driver about .010 smaller than the bearing because as the bearing gets "pressed" into the engine they crush and if the fit on the driver is too small the driver gets stuck. Yes this happened to me on the first one I made.

Great pictures!

1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.