Hot Rod Forum banner
1 - 1 of 4 Posts

· Registered
3,265 Posts
I would use a quality sealer over the tremclad paint at least then use your desired paint. I'm not a big fan of rattle can anything unless its on a MC tank or a pumped rattle can of PPG or other name brands. If its not going to have a trick exspensive paint skin, I wouldn't worry about stripping to bare steel. If you intend on a $$$$$ paint job strip all the way and go from there.

I appologize for no responce sooner, but if you have any frther questions feel free to e-mail me and I will respond sooner.


[ May 14, 2003: Message edited by: Halloweenking ]</p>
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.