[brian12c]

I have a 318 out of a 71 cuda and was told I could only bore it out to a 340 but im not sure. Do you think I could get to 360 by boring and stroking? thanks

 

[Robinson Robin]

Nope won't be able to bore it to the 340's bore anything over .040" is pushing it you might be able to get .060" if you are lucky

 

[Restore60s]

Bore

Check www.strokerkits.com. They are Mopar. You can get a lot of info from them.
Robinson is right, this is just some info on what you can do on Mopar blocks.