Hot Rod Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,265 Posts
Scrape it off, theres no other way that I know of. Willys is correct, after adding the hardner to filler it should be ready to work within 3-5 minutes. Usually the rules of thumb is a thin ribbon across the top of the filler. Don't mix more than you need in one preticular spot unless your very fast and have learned over the years to park your butt on a chair with wheels and wheel to the next filler spot within a several seconds. You'll get the hang of it. One more thing, the filler after mixing should not be the same rich color as the hardner (blue or red) it should be a pale version of the hardner. If the filler is "hot" you have to much hardner.

HK
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top