Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
29 Posts
It depends on what type of paint gun you are using, what type of paint you are using, and how many coats you put on the vehicle. As an example, I just finished a 1971 Olds 442 coupe. I used a syphon type gun, used base coat clear coat-three coats of both base and clear and I needed one gallon of both base and clear. I had about 1/2 pint of base left over and no clear. In my opinion this is nearly perfect as now I have a little paint to touch up the inevitable scratches.

Benji
 
1 - 1 of 1 Posts
Top