Hot Rod Forum banner
1 - 1 of 1 Posts

· Administrator
Joined
·
4,874 Posts
12-31-1969 07:00 PM
URL:http://allshops.org/cgi-bin/community/communityalbums.cgi?action=openalbum&a...
Description:How to use and make a shrinking disc. Details include: bumping dent up using a ball-peen hammer, smoothing bumps made by hammer with hammer and dolly, running the shrinking disc over the surface to show any irregularities, repeating the process, smoothing stretched lumps with a slapper, using shrinking disc to highlight lumps made by slapper, and continuing the process until all irregularities are smoothed out. Also includes example of shaping with a curved shrinking disc, making your own shrinking disc using 18 gauge stainless or cold rolled steel (heating, using shrinker, smoothing wrinkles made by shrinker, stretching any contours, using a pipe and hammer to form center depression, and using a straight rule to ensure disc runs true). Includes photographs of each step.
Category:Metalworking
Tags:None
Views:203
User: Guest
Send to Friend
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top