Hot Rod Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter · #1 ·
I have a opurtunity to purchase 1 of many different machines.
Singer 188U or a 2OU33
Juki DLD-5430, DLD-432, MO3900

Would you recomend any of these for interior projects?
 

·
Premium Member
Joined
·
6,735 Posts
The first two Juki machines are needle feed machines for sewing apparel, and the last one is an overlock machine, which is a specialty machine which would not work at all for sewing car interiors.

The Singer 188 is also a needle feed machine for garment work, and the 20U33 is a zig zag machine.

None of these machines are what you need for car interior work. You should look for an industrial, single needle, lockstitch, compound feed, walking foot machine preferably with reverse.
 

·
Premium Member
Joined
·
6,735 Posts
That, too, is a needle feed machine meant for garment use. All of the machines you listed must be from the same garment factory.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top