Hot Rod Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Scat9000 crank scat pro comp I beam 7/16 screw, icon forged flat tops, 11.1 w/64cc heads, this is a 383 stroker the rods are 6", my question is what type of head to use with my setup its going to be a bracket motor,I already have a .500/.500 [email protected] 302 advertised flat tapet cam I plan on using. Thank you all , any info appreciated
 

·
Banned
Joined
·
9,993 Posts
Procomp 210's, buy them bare, assemble and check everything yourself. Clean up the casting and bowl area.

if you have the money large port vortec heads are great too.
 

·
Of course it's fast
Joined
·
2,670 Posts
I like the patriots. Same specs as the more expensive brands. Only reason they're cheaper is because you're not getting the big name that goes witht the higher cost pieces.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top