Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I am looking for some one that has made this swap. I converted my truck to a '85 1/2 chevy front crossmember with five lug and disk brakes. The brake booster i installed will not clear the stock hyd master cylinder. I am putting a Super T-10 in my truck and am wondering if the linkage assembly from a donor truck like a 63-66 will fit in my 62 cab and on my frame. I can make a bell crank or make a stock one work if its not a direct bolt on.

Thanks Dennis
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top