Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
74 Posts
I just helped a friend here with the same problem. All that was required was to adjust the mechanism on the lower part of the column where the rod coming from the key goes. I believe the 2 screws are 1/4" or 5/16". Loosen it up and I'll bet the key will go to lock. You'll have to look up in your book how to set it with the alignment pin so you have it in adjustment.

Joe
<a href="http://50chevy.freeservers.com/" target="_blank">http://50chevy.freeservers.com/</a>
 
1 - 1 of 1 Posts
Top