Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I'm planning on installing a Heidt crossmember in my 1947 Mercury Coupe. Are there any probelms with this crossmember I should know about and what is the proper way in install this piece? Also, how far back from the front of the rails is the member mounted? I am new to this hobby and need all the help I can get.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Trees, Thank you for the information bu I have a couple more questions. I metal disks from Heidt that need to be welded into the holes on the rail so that should be okay. They only gave me two (one for each side) and I am a little concerned about this. I think I should install one more on each side to strengthen the frame. Also, I still have the body on my car and was wondering how to level the frame. Do you have any advise on this issue?

Thanks,

Coolmerc
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top