Hot Rod Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hi, I'm new here and thought I'd start by showing off the project that I'm working on currently. It's former stock car racer made from a 1933 Chevy three window coupe. Here's a picture:

 

·
Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
Yes, the front hubs are 6 pin with knock-off nuts to secure the wheels. The rear hubs are wide-five "safety hub" type on 3/4 ton spindles. The rearend is a Frankland Quickchange.

Here's a picture of the magnesium wheel I plan to use on the front:



Here are some more pictures of the car:







 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top