Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi,
New to the world of Hotrodding.

Based in southern Australia my current project is a 1927 Chev, still working out what to do but prefer the old school look.

Although I have rebuilt several cars, this will be my first rod. Already addicted, I bought one car as a project and while searching for parts bought another 2 old chevs 1923-25 that are of course "too good to wreck for parts"...

Joining forum to get ideas and advice on my ideas of what will work (and what will not.

MM
 

·
Registered
Joined
·
433 Posts
No good of me trying to help you. Except to say this web site over the last 3 or so years has been excellent with my rebuild. Lots of helpful guys who have done it ALL before. I have found that specific questions get more responses.
I was in Adelaide about two months ago and you are welcome to your 50k speed limits there. We only needed 3 out of 5 gears in the renter.
Goodluck
Cheers
Al.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top