Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,320 Posts
Discussion Starter · #1 ·
I have a combinationvalve from pirate jack that has been leaky from the metering end. Is this something that just needs tightening or is it an adjustment. It is under the little rubber cover. Thanks brake gururs:welcome:
 

·
WFO
Joined
·
5,030 Posts
I have a combinationvalve from pirate jack that has been leaky from the metering end. Is this something that just needs tightening or is it an adjustment. It is under the little rubber cover. Thanks brake gururs:welcome:
Unless the threads were damaged or incorrectly made, you should be able to simply snug it down.

BTW, the combo valve shown is from a late model Impala SS. From the page: Brake Valve Mod, the valve on the end w/the rubber cap does the metering function. The other end does the proportioning function.

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top