Hot Rod Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
199 Posts
Discussion Starter · #1 ·
Good Afternoon,
94 LT1 (no emission, computer reprogrammed), installed in 65 c10. Been running for some time, not yet driven. Check engine light and mis-fire. Cannot get code reader to read.

Removed, tested and cleaned all injectors, reinstalled, now, only turns over, won't fire up.
Fuel pressure is good, power at the injectors.

any ideas?
 

·
Registered
Joined
·
113 Posts
I have same engine in my jag and only thing I can advise is to Get yourself a cable and download scan9495, you can not only pull codes, but you can also scan and monitor everything going on! I believe the author of it might be a member here! His name is Garydoug!
I use it to create data logs as well!
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top