Hot Rod Forum banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
8,454 Posts
Discussion Starter · #1 ·
Several posts have asked for a way to make room for in-dash air conditioning in small cars with gauges sticking into the dash, competing for space. Here is how I did it on a '41 Willys pickup. VERY tiny behind dash space but by making 18ga sheet metal cones and welding them to the dash panel, I made plenty of room for the air conditioning evaporator. Driver gets better look at gauges and looks good too!

 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top