Hot Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
17,613 Posts
i haven't got the cam back from machine shop but it's going to be like 274 comp cam or some where around there and the car is a buick 78 buick regal street and 6 months out of the year it's going on the strip once a month in our little town
So, 6 months out of the year, it's a 100% street car and the other 6 months out of the year it's 10% strip and 90% street. Does that just about sum it up?
You'll be bracket racing, so your E.T. and trap speed won't matter. Consistency is the most important thing in bracket racing.

What I'm leading up to here is your choice of intake manifolds.
The operating range on the Holley 300-25 is 4,500 to 7,600 rpm's.
The operating range on the Edelbrock Super Victor is 3,500 to 8,000 rpm's.

The operating range on a 274 cam is roughly 1,800 to 6,000 and the motor needs matching parts. Use an Edelbrock Performer RPM. Do not use the Air Gap model if you get some cold weather where you live.

Building a motor is all about using parts that complement each other in the same range of rpm's. The RPM makes power from 1,500 to 6,500, about the same as the cam.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top