Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
533 Posts
Discussion Starter #1
I am working on a rear Harley fender to be cut out for taillight and need an LED 'card'/lens about 3"x 3 and a half inches- very thin... I do not want to flush mount it but cut the shape out and put the light behind in an enclosure so it may be removed if desired. I've contacted many suppliers and they either have just thin strip cards (inch by whatever) or smaller round lights. Any cycle guys out there or customizers have a supplier that could help? I've seen it done but never been able to get the source for the lights... THANKS!!! DJ
 
1 - 3 of 3 Posts
Top