Hot Rod Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter #1
i made a tool to grip the 2 sides of the nut on the front input shaft and tryd eveything to get it loose and it will not come..... put break away spray on it and still nothing..... it is reverse thread looks like..... what is there any tricks to get it off? thanks
 

·
Hotrodders.com Moderator
Joined
·
2,783 Posts
nut

Yes it is left hand threads. I have seen some guys use loctite on them when rebuilding.. So you may need to apply some heat to it to release the loctite.. If the transmission is still assembled lock it in 2 gears that will prevent the transmission from turning. Get a hammer and wack the wrech. this will shock the nut and should loosen it.


Keith
 
1 - 4 of 4 Posts
Top