Hot Rod Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I have heard there is a rotor and bearing combination so I can use chevrolet rotors on mustang II spindles. Is there a kit or does anyone know the combination. I am building a mustangII front-end on a 54 chevy pickup but would like to use stock chevy rally wheels. Thanks for your help in advance!!
 

·
Registered
Joined
·
4,259 Posts
Check with Speedway Motors they have the kits.

Here it is installed on my '53. GM 11" rotors and calipers.

 

·
Registered
Joined
·
2,354 Posts
Most kit builders offer this as an upgrade item. For your use, you need a bolt on adapter plate, specified wheel bearings, dust seal and mid 70s gm rotors and calipers (5 on 4 3/4" bolt pattern). We bought our first kit and now built our own since we have a milling machine in the shop to duplicate the plate. The bearings and dust seal are over the counter items.

Trees
 
1 - 4 of 4 Posts
Top