Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
87 Dodge Dakota 6.1 hemi, 39 Chevy Master 85- work in progress
Joined
·
4 Posts
Discussion Starter · #1 ·
I bought a 1939 Chevy Master 85 8 years ago. My original plan was to drive it around all original. It did run and drive but needed a few things, steering box, new front axle and brakes. That was as far as I went with it, I made a brake conversion for a dual master cylinder and thats about it. Its on hold until I have a bigger garage. I'm going to build a frame and go modern drivetrain.




 

·
Registered
Joined
·
1,616 Posts
I did the same with my '39 Master, build a new frame with MII in front and air bags in back. I could not find very much info on a '39 frame so I drew up my own plans. Worked out well. Used 2" X 4" 3/16" wall for the rails. Front cross member was Weld It series.
 

Attachments

1 - 3 of 3 Posts
Top